Oct 14, 2017. Install Esxi Software Raid For Windows. ESXi 6 install stuck on “Relocating modules and starting up the kernel. Recently I was installing ESXi 6 on my personal lab to do some testing, when the installation got stuck, the last message being “Relocating modules and starting up the kernel”So, what's. If you would like RAID you can add a 4-Port RAID controller (requires the Flexi-Pack) since ESXi doesn't support software RAID. Once the server is online. During the installation. This is the root password for SSH as well as the password for the VMware vSphere Client (requires Windows).

I'm a volunteer at a charity, and we have the following setup Dell PE 2950, gen 1, 2x xeon 5160, 32GB ram, perc H700 RAID, 6x 4TB SAS HDD the BIOS is 2.7.0 I had successfully installed ESXi5.5 on this box before we converted the Perc 5i to a perc h700, and there is no data to migrate. I initialized the array, and the H700 sees the one virtual disk. The problem is that when i boot from the ESXi DVD, it seems to load properly, then it hangs on a black screen, the two the lights on the 6 SAS drives are on steady. I'm not getting any indication of problems with the RAID battery.

Any idea what's causing this to hang when i was able to boot from the ESX 5.5 cd previously? Did you use the DELL OEM version of ESXi 5.5, because they've changed the mptsas storage controller driver twice recently in A00 and A01? Download here VMware-VMvisor-Installer-5.5.0-13318 20.x86_64- Dell_Custo mized_A01 I would also recommend installing ESXi 5.5 OS onto a USB flash drive on the server, keeping the OS seperate from the datastore. It's supported, if you look inside the case, there is an internal USB port for this purpose. Juts use a good quality USB 2GB flash drive, HP, PNY, SanDisk, Kingston etc. I'm trying to reinstall everything.

I've already rebuilt the array, no difference - there was no data on it that needed to be saved. I'm trying to install to a USB key, the BIOS sees the virtual disk in the array, and the USB key. I'm just getting a blank screen once the kernel of the installer tries to load. School Smart Printer Label Templates. Tried the dell 5.5 and 5.1 as suggested. Now downloading the 5.0.

See if that works. Could it be a problem with the h700?

This is a donated server, and if there are hw problems, we're in big trouble, as there isn't the money to buy a new(er) one. The firmware on the h700 is the latest - A12. No, this is supposed to be a production machine. I insisted on a license - vsphere essentials. I can understand the 5.0/5.5 difference, but I didn't think there was that much difference in the kernel between 5. Q Indivi Philharmonique Rar File. 0 and 5.1 - apparently there is enough that it won't run.

That's what got me - After 5.5 failed, I tried 5.1 - then I started looking at possible hardware problems, considering that I had just installed an H700 and new 4tb sas HDDs. It didn't occur to me that the difference between 5.0 and 5.1 would have been the culprit, like you i didn't think the difference was THAT big.

This is volunteer work for a charity, and the only reason they have this setup at all is because i'm donating my time and others are donating equipment. I'm not used to working with hardware THIS old and at the same time having the resources (through charity pricing) to have the latest software. Strange combination.